Ships by ground within 7 days from the USA.
The Atom Electric B.10.X combines the best qualities of other electric skateboards and takes it off-road. The B.10's grunty 1000W brushless DC motor, fed by high performance Samsung 25R lithium-Ion batteries and our custom FOC sine-wave speed controller, boasts enough torque to boost you up hills and thanks to the B.10Xs smooth and reliable regenerative braking you'll be able to come right back down and charge your battery in the process. With Atom Electric's B.10.X your off-road adventure awaits.
Want to know more about the Colorado based Lee brothers, Jason and Joel, behind Atom Electric Longboards? They've been crazy cool skateboarders for LIFE! Read about them HERE.
*Hill climbing ability depends on factors such as rider weight, charge status, road surface, and initial speed (board has higher torque at higher speeds), but average size riders can expect to climb hills of at least 10% grade.
***WARNING: Never attempt to use a battery charger other than the original manufacturer's equipment to charge the Atom Electric B10X Electric Skateboard. Doing so may risk damaging the battery, will void the warranty and may even result in fire.***
Want to switch up your wheels and turn heads while you're at it? Check out the B10.X Replacement Tires in our Parts section by just clicking the picture below:
Want to make sure you have a spare belt handy? How about picking one up by clicking below:
Range*: 7 miles / 11 km
Max Speed**: 15 mph / 24 kmh
Max Grade***: 12%
Max Rider Weight: 275 lb / 125 kg
Board Weight: 14 lb / 6.3 kg
USB Accessory Charging Port?: No
Battery Charge Time: 2 hours
Deck Material: Bamboo / Maple
Deck Length: 35.8 in / 91 cm
Deck Width: 10 in / 25.5 cm
Motor Type: Single Belt Drive Brushless Direct Current (BLDC)
Motor Max Power Rating: 1000W
Motor Braking: Regenerative Braking
Motor Sensors: Sensorless
Belt Spec: 225-3M-13mm / 246-3M-13mm^
Cell Type: Lithium-Ion (18650)
Cell Spec: Samsung 25R
Cell Voltage (Nominal): 3.6 V
Cell Current Capacity (Ah): 2.5 Ah
Cell Energy Capacity (Wh): 9.0 Wh
Battery Configuration: 10S X 1P (10 cells)
Battery Voltage (Nominal): 36V
Battery Current Capacity (Ah): 2.5Ah
Battery Energy Capacity (Wh): 90 Wh
Charger / Battery Voltage (Max): 42 V
Battery Charger Output (Amps): 1A
Wheel Material: Super High Rebound PU
Wheel Dimensions: 100mm X 63mm
Wheel Hardness: 78A
Remote Battery Type: Rechargeable Li-Ion
ESC Software: Sine Wave (FOC)
*Range is based on a 155lb (70kg) person riding conservatively (slow/eco mode) on relatively smooth and flat terrain with minimal wind. Actual mileage varies depending on rider weight, riding surface, hills, wind, and most importantly riding habits. To achieve maximum mileage kick to start, accelerate slowly, coast when possible, brake lightly, and ride below max speed. Going slower means going further. Use slow / eco mode to achieve longest possible range.
** Max speed is calculated when riding on smooth flat ground with no wind with board at full charge. Max speed will decreases as your battery level decreases. This is true for all electric boards.
*** Max grade calculated based on 155 lb (70kg) rider riding on smooth surface with mild breeze at full charge. Actual max grade depends on rider weight, riding surface, and battery level.
^ First generation used 225mm belt. Boards after that used 246mm. Check specification on your actual belt when ordering replacement.
WARNING: Never attempt to use a battery charger other than the original manufacturer's equipment to charge the Atom Electric B10X Electric Skateboard. Doing so may risk damaging the battery, will void the warranty and may even result in fire.
ATOM ELECTRIC WARRANTY POLICY
Atom Electric warrants products against defects in workmanship and/or materials to the original retail purchaser for a period of six (6) months from the original date of retail purchase. A copy of receipt from authorized Atom dealer must be provided with any warranty claim.
Warranty is limited to manufacturer's defects in workmanship or materials.
The warranty is void if the product is damaged due to any of the following:
- accident or impact;
- misuse or abuse;
- normal wear and tear;
- exposure to water;
- battery left discharged for extended period of time;
- battery charged with charger other than one provided with board;
- modifications to the product;
- improper assembly or repairs;
- use in competition;
- commercial use.
Purchaser / Rider Responsibility & Hold Harmless
Riding an electric skateboard can be DANGEROUS. It is the purchaser's and / or rider's responsibility to read and follow all product instructions, including all safety precautions, and ALWAYS wear appropriate clothing and use protective gear when riding. Protective gear can be found under the GEAR tab on the ElectricSkateHQ.com website.
It is important to assess the rider's skill level before using an electric skateboard and adjust the beginning speed of the electric skateboard to be appropriate for the rider. Also, check the skateboard speci-fications to assure the rider is not OVERWEIGHT, UNDERAGE or the wrong HEIGHT for the electric skateboard based upon the manu-facturers recommended rider age, weight and height limitations.
In general, electric skateboards are not to be used for tricks that involve putting pressure on the bottom of the board where the battery unit is housed, such as railing or going down steps, as the electrified board may stop working and damaged batteries can be caustic and may even be DANGEROUS, plus unduly rough usage of the electric skateboard by these and other activities may void the manufacturer's warranty; it is the responsibility of the purchaser and / or rider to check the manufacturer's product manual for recommended usage and warranty information.
Street, city or urban style boards are designed to operate on solid surfaces; riding over an uneven surface may not only damage the electric skateboard's wheels and motors, but may also negatively affect the battery housing. Off-road electric skateboards are designed to handle various terrains; however, most manufacturers recommend staying away from water and wet surfaces as a wet deck can become slippery and it is recommended to never submerge a battery compartment in water.
Riders should ALWAYS BE AWARE OF THEIR SURROUNDINGS and avoid obstacles or pedestrians which may be present; the rider's electric skateboard may slide while applying the brakes or may stop suddenly.
The purchaser and riders of electric skateboard products and accessories obtained through Electric Skateboard Headquarters, LLC, and / or ElectricSkateHQ.com, are responsible for knowing and obeying all country, state, province and local regulations regarding the proper use, possible licensing requirements and disposal of purchased products.
The purchasers and riders of electric skateboards and accessories obtained from Electric Skate Headquarters, LLC and / or purchased through ElectricSkateHQ.com, shall use these products at their own discretion and risk, and shall hold Electric Skate Headquarters, LLC, it's employees, associates, partners, affiliates, agents, heirs and / or assigns harmless for any and all loss, liability or damages to property or fines, personal injury or loss of life to persons as a result of purchaser's and / or rider's use of products purchased.